3. Adjust the conten拍海t of the paint on the 笑舊material so that the pa草可int does not flow. Coat秒東ing Lighter contact in the range of abo自女ut 3-4 times the length of the dr要關um spreads the paint on the obj謝快ect to be coated. When paint間水ing the surface, use a lighter for弟呢ce to gradually increase the force to開少 spread the paint evenly.
4. If a large area is applied at 跳費one time, roller marks will be formed 樂道at the junction of the coating f鄉拍ilms, so one-third of the roller 歌還width should be overlapped, a如農nd the coating should be carried 暗體out on the basis of 50科友-60CM2, and the narrownes習商s should be in the small roller.工區 When constructing a large 說煙wall, at the same time, t樹物he construction is carried out in la放理yers and sections acco遠電rding to the grid joints of each lay媽輛er. First, use tape to那放 protect the upper and lower gri新從d joints. When coating, u鄉南se bamboo poles to lengthen the那光 rollers. Roll from the 票長highest point of each layer 聽分to the lowest point of each l下道ayer at once.
5. When spraying, leave the 拍妹construction wall about 30 cm, an了得d spray evenly from top to bot大請tom or from left to right.站林 During the constructi黑理on process, the nozzle of the spray gun來拿 must be cleaned from 用間time to time to ensure the constr讀你uction quality.